Clean Room Solutions


A Clean room is a place where the environment is controlled for production and manufacturing of goods. Here the airborne particles are controlled to a particular limit. Eradicating the sub-microns airborne contamination produced by people, process, facilities and equipments through a process control. The levels at which it has to be removed depends upon the standards set by the authorities.

The only possible way to manage contamination is to control the entire environment. Like the rate of air flow, pressure, humidity, temperature and special filters all these needs to be kept under tight check. Also the sources of these particles need to be either stopped or controlled wherever possible. There is a lot more to Clean Rooms rather than just air filters. It is an entire project which needs proper planning and manufacturing using appropriate procedures and techniques. Clean rooms are generally needed by Pharma companies, biopharmaceutical, Electronic goods manufacturers, medical device industries and many other manufacturing units.

Importance of the Clean Room Solutions

It is considered as an essential element
Clean room standards are considered as very important and are required to follow strict guidelines, for the safety of the concerned people and also especially due to sensitive environmental issues. For e.g Pharma companies are required to maintain very specific cleanroom standards or the consequence can be very serious.

Normally, cleanroom standards are held by various authorities like the International Organization of Standardization (ISO). These authorities require a certain limit on the amount of particulates that are considered normal within the surrounding area. This degree varies upon the particular condition and the process.

Enhancing Your Facility and Workflow Proficiency
It is one of the most important concerns that need to be addressed so that the wellbeing of the employees is maintained and the business is not compromised

How does a clean Room Work?

Most of the clean rooms follow a positive pressure which is specially designed to keep away the contaminants from coming into the room. A clean air is pushed into the room after passing through a fan-powered by High efficiency particulate (HEPA) that helps to remove particles as minute as 0.5 microns. As the pressure in the room is now greater than the outside the contaminated air is pushed down and eventually thrown out of the room through the vents. This enables the air and contaminants from the processes to be flown out of the room continuously.

Cleanroom Applications:

  • Wafer fabs
  • Assembly & test floors
  • Trace Metals Cleanrooms
  • Vibration Isolation
  • Radiant Cooled Labs
  • Secured government labs
  • TEM/SEM rooms
  • Chemical storage and dispense bunkers
  • Cell culture suites
  • Sterile fill finish lines
  • MOCVD labs
  • Photolithography bays
  • Application development labs
  • Restricted access barrier (RAB)
  • Pilot lines
  • Clean storage
  • Final packaging
  • Vaccine plants
  • Poly silicon finishing

We know value of customer time, value of product losses, breakdown time & system failure so we follow all the industrial standards and Guidelines as mentioned below:

  • Sheet Metal & Air Conditioning contractors’ National Association (SMACNA)
  • American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)
  • Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE)
  • National Building code of India (NBC)
  • We offer different types of systems to fulfill and type of Cleanroom classification like Air cooled chiller plant & AHU; Water cooled Chiller plant with AHU & Direct expansion plant with AHU.

    Cleanroom Classification as per following:

    *** 14644-1 FEDERAL STANDARD 209E
    ISO Class English Metric
    *** 1

    ISO 2

    ISO 3 1 M1.5
    ISO 4 10 M2.5
    *** 5 100 M3.5
    ISO 6 1,000 M4.5
    ISO 7 10,000 M5.5
    *** 8 100,000 M6.5
    ISO 9

    Airborne Particulate Cleanliness Classes (by cubic meter):

    Class Number of Particles per Cubic Meter by Micrometer Size
    0.1 micron 0.2 micron 0.3 micron 0.5 micron 1 micron 5 microns
    ISO1 10 2
    ISO2 100 24 10 4
    ISO3 1,000 237 102 35 8
    ISO4 10,000 2,370 1,020 352 83
    ISO5 100,000 23,700 10,200 3,520 832 29
    ISO6 1,000,000 237,000 102,000 35,200 8,320 293
    ISO7 352,000 83,200 2,930
    ISO8 3,520,000 832,000 29,300
    ISO9 35,200,000 8,320,000 293,000

Why a Cleanroom from Weather Controlling Solution India Is the Best Choice

At Weather Controlling Solution India we are the leading designers, manufacturers, suppliers and supporters of ClearRoom technology, so you are ensured that the clean room solution you receive are of the highest standards. With a wide experience and understanding of the industry we identify the need of a premium quality cleanroom, and deliver the solution with the highest specifications. As a well known company we have provided CleanRoom solutions to a several government and private institutes. We aim to be at the forefront of technology by delivering the latest design and premium solutions to our clients across industries. With unmatched experience in Cleanroom Solutions, our company is happy to meet your requirements when it comes to clean rooms solutions. Please don’t hesitate to contact us on 020-29985411 to discuss your specific requirements.

Our Location

Plot No:32, D II Block., Nigdi Bhosari Rd, HDFC Colony, MIDC, Chinchwad, Pimpri-Chinchwad, Maharashtra 411019

Get Direction

Opening hour

Mon-Fri (9.00-19.00)
Sat-Sun (Closed)

Drop a message
7720032487/ 7720032452/ 7720032404

Mail Us
Enquire Now Call Us WhatsApp Us